Introduction

Multidrug-resistant (MDR) bacteria have emerged as one of the biggest threats to human health as result of the overuse and abuse of antibiotics in global healthcare (1). Medicinal plants have been the main source of therapeutic remedies from ancient times, despite their crucial significance in modern medicine. Phytochemicals, which are produced from plants, have strong effects when used alone or in conjunction with traditional antibiotics. Plant extracts, rich in polyphenols and tannins, offer a promising alternative to combat antibiotic-resistant bacteria, often by enhancing the efficacy of conventional antibiotics or acting as efflux pump inhibitors (1). Bacteria employ a unique enzyme known as Peptidoglycan Editing Factor (PdeF) to identify and eliminate the offending amino acids in order to stop this. It is a bacterial cytoplasmic amidase that serves as a peptidoglycan (PG) biosynthesis quality control mechanism (2). Cell integrity and shape depend on PG, a characteristic of the bacterial cell membrane Understanding the cell wall biosynthesis pathway aids in the development of novel tactics to stop bacterial growth. Therefore, PG, is a key target for in silico based studies. It controls precursor-editing process that preserves the integrity of the peptidoglycan structure that is crucial element of bacterial survival. Therefore, PdeF is essential for preserving the bacterial cell wall's mechanical and structural integrity, which is necessary for defense against osmotic pressure (3).

Chamaedorea seifrizii belongs to the Arecaceae family and is often referred to as bamboo palm, parlor palm, or reed palm. It is the one among the member of palm family (4). This subtropical palm, which may reach a height of 20 feet, is frequently used as a houseplant. One of the largest and most significant medicinal families in the kingdom of plants, the Arecaceae family is known for a variety of chemical components and biological activity (5). Chamaedorea seifrizii, is classified as a plant that has traditional and complementary medicine values to cure Goiter, bronchial asthma, and vaginal disorders (6). This plant is considered as ornamental and generally used as indoor air toxins and chemical vapor/pollutant remover. Nowadays, a lot of people grow C. seifrizii both indoors and outdoors. Earlier research pointed out that because this plant can absorb toluene, it can be used to treat neurological, ocular, and eye, nose, and throat irritations as well as unsteadiness (7). Extracts from C. sefrizii reported in cancer chemoprevention via NQO1 enzyme induction in the Hepa-1c1c7 murine hepatoma cell line (8). Nevertheless, the majority of current research on C. sefrizii is still descriptive and compartmentalized, with little critical examination of its phytochemical composition and pharmacological significance. Notably, there hasn't been a thorough assessment of the chemical profile of C.sefrizii fruit extracts. One major knowledge gap is the lack of comprehensive phytochemical analysis, especially for formulations meant for biological application. By integrating qualitative phytochemical screening utilizing dual integrated techniques based on in vitro and in silico research, the current work fills this gap and offers a dual chemical viewpoint. While phytochemical screening provides first information on the classes of bioactive chemicals found in silico research, it also allows for non-destructive, multi-elemental evaluation pertinent to formulation considerations, toxicological safety, and antibacterial potential. The integration of these approaches allows a more holistic evaluation of C. sefrizii fruit extracts than either method alone. Targeted studies on PdeF are lacking which prompted us to do further studies for its possible therapeutic uses. Importantly, the biological relevance of the targeted phytochemical classes underpins the experimental design of this study. Therefore, the objective of current study was identifying bioactive compounds from methanol extract of C. seifrizii fruits followed by in vitro antibacterial evaluation and in silico validation. It was hypothesized that methanolic fruit extracts of C. seifrizii contain bioactive phytochemicals that support their traditional antibacterial uses. It was also thought that combining phytochemical screening with in silico analysis would produce a more thorough chemical framework pertinent to biological application.

Materials and Methods

Plant collection

Wildly growing Chamaedorea seifrizii (Figure 1) plant samples (fruits) were collected from garden area close to study area (31.30 latitudes North and 75.60 longitude East, Jalandhar, Punjab, India). The botany department confirmed the plant, and BT106 was entered on the voucher and deposited in biotech herbarium. The climate of this city is humid subtropical, with long, hot summers and cold winters. The experiment was conducted in January –April 2025.

Preparation of Extracts

After rinsing the gathered fruits with distilled water to get rid of any sticking material, they were shade-dried for 7 days at room temperature (25–28°C) until their weight remained consistent. A mortar and pestle were used to further decrease the size in powder form. After that, it was sieved, processed using an electrical grinder, and kept at 4°C for further examination. Phytocompounds from powdered C. seifrizii fruits (3g) were extracted using methanol/water solvent (8:2 v/v). The mixture was manually mixed by shaking, vortexed, and was incubated overnight in orbital shaker at ambient temperature prior to being spun down for fifteen min at 10,000 rpm and 4°C. The resulting extract was collected, filtered using Whatman No. 1 filter paper the filtrate was concentrated using a rotary evaporator at 64.5°C (percentage yield: 5.7%) and stored at 4°C for further examination. Extracts were designated as C. seifrizii fruit methanol extract: CFME.

GC-FID Analysis of Extracts

According to Amrita et al., (9), a gas chromatography flame ionization detector (GC-FID) system (Chemtron Pvt ltd. 2045) was used to identify phytochemicals in methanol extracts of fruits of C. seifrizii. Sample volume of 2µl was used for analysis in a split mode. 10% OV-17 was placed onto 80–100% mesh Chromosorb W (HP) in a 2-meter stainless-steel column that was part of the GC apparatus. 30 mL per minute of nitrogen gas (99.9995% purity) was employed as the gas used for the mobile phase. The temperature of the injector and detector was retained at 200°C and 250°C. The oven's ramping settings were 110°C at first, then 200°C at a rate of 2°C per minute. By comparing the relative retention time with authenticated standards and data from the literature, bioactive chemicals were found (10).

Fingerprint Analysis of Extracts

Understanding the chemical characteristics of the numerous phytochemical substances and functional groups found in CFME is crucial for understanding their therapeutic effects. Thus in order for functional characterization, it was subjected to fingerprint analysis using ultraviolet spectroscopy (UV), Fourier Transform Infrared Spectroscopy (FT-IR) and fluorescence spectroscopy (9). For UV, 1 mL of CFME was subjected to scan from 200 to 700 nm and peaks were recorded on UV-VIS spectrophotometer (Labtronics, India). To identify functional groups in extracts' active components, FT-IR analysis was done. About 10µL of extracts were used for this little quantity and were scanned in the 400–4000cm^-1 range using an FT-IR spectrophotometer (Perkin Elmer, USA). For fluorescence examination, 3 mL of CFME was used and peaks were recorded (Perkin Elmer, USA spectrophotometer). The NN07 method was applied, with a 10nm slit width, emission ranging from 410nm-700nm, and a scan speed of 240nm/min at an excitation wavelength of 380 nm. Experiments were carried out at room temperature (25°-30°C). 

In-vitro Evaluation of Antibacterial Activity

Using the agar disc diffusion technique (9), the antibacterial activity of CFME was evaluated against four test organisms: Pseudomonas aeruginosa (MTCC 424), G+ Staphylococcus aureus (MTCC 3160), Bacillus subtilis (MTCC 121), and G-Escherichia coli (MTCC 40). Sterilized paper discs with a diameter of 5 mm were impregnated with CFME ( 80 µg). For every microbial strain, 12-hour-old cultures were used to establish new inoculums. The LB-Agar plates were swabbed with bacterial suspension and then left to dry for half an hour. The paper discs loaded with CFME were then placed in the center of the petri plates. The plates were incubated for 24 h at 37°C after being left at room temperature for 20 min. Gentamycin was used as the positive control (100µg/disc). Methanol was used negative control. Using a trans-illuminator, one can see the zone of inhibition (ZOI: mm) surrounding the disc after incubation; this radius is indicative of the antibacterial activity of extracts.

Membrane Integrity Assay

The effect of CFME on membrane integrity was examined against the bacterial strains Pseudomonas aeruginosa (MTCC 424, G-), Escherichia coli (MTCC 40 G-), Staphylococcus aureus (MTCC 3160 G+), and Bacillus subtilis (MTCC 121 G+) in accordance with the protocol described by Nirmala et al., 2020 (40) with some modifications. CFME (80 µL) was used to treat the bacteria (1x10⁸ CFU/mL). Bacterial cells were treated with 200 µL of Triton X-100 as a positive control. As a negative control, untreated cells were used. After being incubated in an orbital shaker incubator at 37°C and 150 rpm for 12 h, the treated cells were monitored. One mL of the sample of each bacterial strain was extracted from each flask after an equivalent amount of time had elapsed. The cytoplasmic contents were then extracted by centrifuging the cells for 10 min at 6000 rpm. The resultant supernatant was collected and analyzed at 260 nm using a Labtronics single beam UV spectrophotometer.

Computational Studies

To validate the wet lab study, the in-silico analysis was conducted using major phytocompounds osthole against targeting PdeF, associated proteins involved in the bacterial cell wall synthesis.

Preparation of Ligands

Major abundant bioactive compound viz: osthole in CFME was chosen as ligand for molecular docking studies. Ligands were prepared by retrieving SMILES from the NCBI-PubChem (https://pubchem.ncbi.nlm.nih.gov/) database and 3-D structures were generated using UCSF-chimera. Gentamycin drug was used as a standard inhibitor.

Target Protein Preparation

The crystal structures PdeF (pdb id: 7fbg) was employed as target enzymes in this study. PdeF structure was obtained from the RCSB-PDB database (https://www.rcsb.org/). Target enzyme receptors were prepared for docking studies using the dock prep set up in the Chimera software. Dock prep is an optimization part that corrects structure, charge anomalies, and atomic bond length.

Molecular Docking

To investigate the binding method of bioactive compound selected as ligand with members of PdeF protein, molecular docking was carried out by using Cb-dock2 (https://cadd.labshare.cn/cb-dock2/php/index.php). Docking was executed by uploading the ligand and target enzyme molecules in a .pdb file to the cb-dock2 tool. The best-generated model in the .pdb file is downloaded and saved. The enzyme-ligand 2-D interactions were predicted by using the Biovia 2020 and UCSF Chimera tools.

Molecular Dynamic Simulation (MDS)

To ascertain the binding stability, conformation, and interaction modes between the chosen best docked bioactive compounds (ligands) and receptor (PdeF), the molecular dynamic simulation was assessed following Chauhan and Sharma (2025). GROMACS 2019.2 software was used to perform molecular dynamics analyses on the chosen ligand-PdeF complex files. In order to reduce the initial vacuum in the molecular dynamic simulation, 5000 steps were taken using the steepest descent technique. The complex structure in a cubic periodic box of 0.5 nm was solved using a simple point charge (SPC) water model. The complex system was then supplemented with a sufficient amount of Na+ and Cl− counter ions to maintain the salt concentration at 0.15 M. The NPT (Isothermal-Isobaric, constant number of particles, pressure, and temperature) equilibration was used to simulate each complex for 50 ns in the final run (https://simlab.uams.edu/,https://sibiolead.com/MDSIM). As functions of structural stability, the outcomes of the post-MD simulation studies were shown as RMSD, RMSF and Rg. Additionally, binding free energies were estimated using the generalized Born surface area (MM-GBSA) of molecular mechanics, which was determined via equilibrated GROMACS trajectories.

Drug-likeness and ADMET

Physiochemical properties and Drug-likeness properties of ligand (osthole) were conducted by employing SWISSADME (http://www.swissadme.ch/). Pharmacokinetics ADMET (Absorption, distribution, Metabolism, excretion and Toxicity), studies were conducted using ProTox 3.0 tools (https://tox.charite.de/protox3/) and pkCSM tools (https://biosig.lab.uq.edu.au/pkcsm/).

Statistical Analysis

Microsoft Excel and SPSS 26.0 of the Statistical Product and Service Solution (SPSS) were utilized to analyze the collected data of ZOI. To determine the statistical significance of the data between groups, Tukey HSD post-hoc statistical analysis was conducted. At p < 0.05, mean differences were deemed significant. The trials were conducted in triplicate (n = 3), and the results were presented as Mean ± Standard Deviation.

Results and Discussion

Fingerprint Analysis of Chamaedorea seifrizii Fruit (CFME) Extracts

UV-VIS Spectroscopy provides a highly thorough insight of the quantitative and qualitative makeup of plant-based bioactive chemicals and herbal derivatives. This spectroscopic fingerprint helps with quality control, drug development, and comprehending characterization, identification, and quantification of several phytochemicals in a sample. The existence of phytochemicals was shown by the qualitative UV spectroscopy profile of CFME, which showed several strong peak from at about 350 nm with absorbance of 1.3 (Figure 2A). Early study by Sowmya et al (11) reported that certain kinds of phytosubstances can be identified by the presence of peaks in particular wavelength bands. For instance, the absorption in the 200–400 nm range points to heteroatoms and unsaturated groups, which are characteristics of organic chromophores. The term "UV profile" describes a phytochemical's distinct ultraviolet-visible (UV-Vis) spectroscopy signature, which shows particular absorption bands that signify the presence of phytochemicals (12). The presence polyphenolics was further validated by quantitative analysis test which revealed contents is a following order: Phenolics: 392.23±0.23 [µgGAE gDW-1], Flavonoids: 290.33±3.85 [µgRUT gDW-1], Tannins: 208.85±2.12 [µgAA gDW-1] (Supplementary Table 1).

Fluorescence spectroscopy is a highly sensitive, rapid, and often non-destructive analytical technique used to detect, identify, and quantify compounds by generating a unique "fluorescence fingerprint". Fluorescent spectroscopy is used to create a "fingerprint" for detecting compounds (13). This method relies on the unique spectral properties of compounds, allowing for rapid, non-destructive and sensitive analysis (14). The fluorescence emission spectrum of CFME is shown in Figure 2B. One prominent peak lambda at 450 nm (green fluorescent region/) was seen in CFME, suggesting the presence of secondary metabolites compounds in CFME. Flavonoids, terpenoids, and flavins may be the biomolecules found in the green fluorescent area (14). Donaldson, (15) reported that flavonoids are of interest as potential therapeutic agents and are autofluorescent with emission at green, yellow and orange wavelengths in plants such as Eysenhardtia polystachya. Singh and Mishra (16) also reported the presence of polyphenolics and anthocyanins in vegetables extracts in the fluorescent range of 500-650 nm. A wide band in the 650 nm (red fluorescent region) is frequently ascribed to alkaloids, polyacetylenes chemicals and products of the Maillard process when stimulated at 280 nm (14, 15). Plant’s fluorescence emission spectrum may be thought of as its chemical signature, reflecting how it reacts to biotic and abiotic environmental challenges and highlighting the importance of secondary metabolites. When exposed to radiation of an appropriate wavelength, a variety of metabolites, including proteins, coenzymes, flavonoids, phenolics, alkaloids, chlorophylls, and components of cell walls, exhibit autofluorescent behavior (14). The accumulation of fluorescent secondary metabolites, such as terpenoids, carotenoids, and phenolics, which are critical for the proper growth and development of plants, is thought to shield cellular structures from the damaging effects of abiotic stressors. Szukay et al (14) studied bee products and cited that the presence of a distinct mix of vitamins, phenolic compounds, aromatic amino acids, and Maillard reaction products gives fluorescent characteristics in bee products. Many chemical compounds such as polyphenols and flavonoids are fluorophores in spice extracts (15).

FT-IR fingerprint analysis of extracts provides a rapid, non-destructive, and low-cost method to identify chemical composition by detecting functional groups and vibrational signatures, particularly in the 1500–500 cm^-1. The spectrum, often viewed in the fingerprint region (500– 1500 cm ^-1), acts as a unique signature of the compound's structure, allowing for distinguishing between species or plant parts. FT-IR profile of CFME is displayed in Figure 2C. Four major sections may be distinguished in the FT-IR spectrum: the first is 4000-2500 cm^-1, the second is 2500-2000cm^-1, the third is 2000-1500cm^-1, and the fourth is 1500-400cm^-1. Due to its abundance of complex peaks, the fourth area of the infrared spectrum is often referred to as the fingerprint region (16). FT-IR spectrum was measured at the range of 4000-650 cm^-1 that showed different peaks. Supplementary Table 1 provides comprehensive details on every peak. The FT-IR peaks showed variance across in extract. The FT-IR spectra of both CFME showed a wide band in the 3400–3200 cm^-1 region, which was caused by the OH– group and therefore indicated the presence of phenolic chemicals. This region exhibits both symmetric (sym) and asymmetric (asym) stretching due to polymeric hydroxyl group (O–H) and H-bonded stretching that is typical of polyphenolic compounds (16). Other distinct bands were seen in CFME extract at around 2800–2900 cm^-1, which was caused by C–H stretching from the alkanes. This was due to the -CH, -CH₂, and -CH₃ stretching vibrations, which are produced from the carbohydrates and sugars in herbal extracts (16). Furthermore, at around 1200 cm⁻¹, the phenolic C–O stretching was detected. The C–O of pyran, which is characteristic of flavonoid C-rings, is the cause of this stretching (16). The presence of aromatic chemicals is strongly correlated with these group frequencies. The 1500–400 cm^-1 area of the FT-IR spectrum, showed variations. The area, which stretched between 1500 and 400 cm−1, is sometimes referred to as the fingerprint region due to the abundance of distinctive single bands with low intensities that are linked to particular functional groups. C–H, C–O, C–N, and P–O bonds are among these groupings. It is the fourth main area in the infrared spectrum, so named because it has a great deal of complicated peaks. Fourier Transform Infrared Spectroscopy (FT-IR), often referred to as “fingerprint" method because it produce distinct "fingerprint," or spectral pattern which is particular to a molecule or a compound. This unique fingerprint pattern enables the identification and examination of chemical compositions and structures (17). As per earlier research, herbal extracts may be identified and characterized using FT-IR spectroscopy, which also helps with quality control by identifying functional groups. It offers a non-destructive technique for sample analysis that calls for little setup and little amounts. Numerous researches have been conducted on the use of spectroscopic techniques, particularly Fourier-transform infrared spectroscopy (FT-IR), to identify bioactive chemicals in plants (18). These results imply that secondary metabolites are plentiful in Chamaedorea seifrizii fruits (CFME) extracts. The existence of the aforementioned secondary metabolites may be the cause of Chamaedorea seifrizii therapeutic qualities.

GC-FID Identification and Quantification of Bioactive Compounds Present in Chamaedorea seifrizii Acetone Extracts

Phytochemical fingerprinting is a qualitative technique that uses color changes and/or precipitates of herbal formulations as markers of the presence of secondary metabolites in plant material (19). Many modern analytical techniques have been created in the domains of clinical, pharmacological, and biochemical research. These techniques are essential for figuring out a substance's pharmacological features, therapeutic qualities, active ingredients, and other specifics of its usage. Although GC-MS technique was limiting factor of the present study, however, GC-FID phytochemical analysis is one of the contemporary methods for identifying and isolating phytoconstituents. GC-FID is a modern technique that may be used to identify and isolate plant phytoconstituents (19). Figure 3 shows the typical GC-FID chromatogram, which show the peaks that correspond to several bioactive compounds found in the extracts of Chamaedorea seifrizii methanol extract (CFME). It lists the compounds present in the CFME, together with their percentage (%) compositions, and retention time (RT). The GC–FID analysis of CFME led to the identification of 13 components. As shown in Figure 3, dominant phenolic compound was osthole (12.28%). These findings are similar to those of Duru, (20), who used gas chromatography and a flame ionization detector to measure the phytochemical content in solvents and observed maximum amount in an ethanolic extract of Zeamays husk. Additionally, there have been reports of some of these components' biological activity. Numerous plants naturally contain osthole, a substance that resembles coumarin. It is renowned for a variety of pharmacological properties, including as anti-cancer and anti-osteoporotic actions (21). According to certain research, osthole may have neuroprotective benefits (22). Chen et al., (23) reported that osthole suppresses ITGα3/ITGβ5 signaling, which prevents highly metastatic breast cancer cells from migrating and invading. Because of its many biological actions, osthole is being researched for its potential as a therapeutic substance. Additional possible advantages: osthole is also being investigated for its ability to cure diabetes, allergies, and other ailments (21). Based on this data, it was concluded that Chamaedorea seifrizii is rich in phytochemical constituents that have a key biological activities, such as, antioxidant according to the reviewed literature. Consequently, the diverse range of physiological potentials and biological activities exhibited by Chamaedorea seifrizii may be attributed to the existence of these bioactive chemicals.

In silico Analysis

Molecular Docking

PdeF (Peptidoglycan Editing Factor), which is necessary for the latter stages of peptidoglycan (PG) bacterial cell wall formation, was the focus of this in-silico investigation. Molecular docking is one of the efficient computational methods utilized in this scenario to forecast and detect the potential binding mode that takes place between a chemical and a certain target protein or receptor (24). Molecular docking is a robust and reliable technique for analyzing the binding affinity, pose orientation, and interaction pattern of small molecules in the active area of the target protein. The benefits of molecular docking for drug design and discovery are well established. In terms of time and resource investment, the dry lab approach offers a significant advantage over in vivo lab experiments (25). Molecular docking has been an essential part of in-silico drug research in recent years (25). This structure-based approach aims to predict the atomic-level interaction between a small chemical and a protein. This enables researchers to understand the fundamental biochemical process underlying this interaction and investigate how small molecules, such as bioactives, behave within the binding region of a target protein (26).

PdeF was used as target in this molecular docking study, with the most prevalent phytocompound osthole, as identified by GC-FID, found in C. seifrizii methanol extracts (CFME). Table 1 shows the docking score for osthole bioactive molecule against target (PdeF) and other relevant information. Figure 4 shows 3D model of PdeF complex with highly affinitized ligand osthole. Osthole was shown to have binding potentials with binding energy -6.8 kcal/mol. Less binding energy indicates higher affinity of ligand towards target protein. When ligand-receptor interactions take place, binding affinity is a crucial element that must be taken into account. The ligand (compound) needs less energy to attach to the receptor if the binding affinity is high. Therefore, high binding affinity levels have a greater potential to interact with target macromolecules. Notably when positive drug gentamycin was docked to PdeF, binding energy was -6.7 kcal/mol. It clearly indicated that bioactive compound osthole has robust binding with PdeF protein comparable to synthetic drug gentamycin. By examining the docked structures, significant interactions between the ligand and the protein are also found, such as alkyl-Pi-alkyl, and hydrogen bonding interactions. These interactions can provide information about the ligands' mechanism of action and guide further structural optimization (27). The ligand's capacity to form hydrophobic or hydrogen bonding contacts with the active site residues of the receptor protein during docking determines its affinity for the receptor. The two-dimensional interactions between osthole and the amino acid residues in the corresponding target protein's active region are depicted in Figure 4. Our results showed that osthole ligand could dock at the binding site of PdeF. Despite having somewhat different docking scores, pose orientations, and interaction patterns, both ligands preferentially occupied the binding region and formed polar and non-polar interactions including pi-pi stacking, alkyl, pi-alkyl, and hydrogen bonds (H-bond) in the PdeF’s enzyme's active sites via contact residues. For instance: it was observed that most stable complex osthole– PdeF was stabilized by 4 conventional H-bonds. The amino acids THR 24, LYS 267, GLN 15, which form conventional hydrogen bonds when the ligand binds to PdeF receptor, play an important role in antibacterial activity. This finding indicates that C. seifrizii extract (CFME) compound osthole possible depict antibacterial mechanism by targeting PdeF. In-depth analysis revealed that osthole showed affinity towards DUF152 domain of PdeF involving “A” chain residues similar to synthetic drug gentamycin. It is part of the core domain of PdeF proteins and is implicated in peptidoglycan editing (2). Although bacterial peptidoglycan editing factors are acknowledged as a promising new target for antibacterial medicines, there are presently no licensed medications that particularly target them. Ongoing research is looking at novel enzymes in the larger peptidoglycan (PG) production pathway as possible pharmacological targets, although numerous current drug classes, including vancomycin, cephalosporins, and penicillins, target this process (28). Even though there aren't any particular medications available to block PdeF, the continued study in this field shows promise for the creation of new antibacterial treatments in the future that could circumvent existing resistance mechanisms (29). The results of the study suggest that C. seifrizii extracts could be the primary source of antibacterial substances. According to the data mentioned above, phytocompounds exhibited a high affinity for PdeF after ligand contact. Consequently, it was postulated that PdeF alteration results in a modification of the bacterial cell wall and enzyme conformation. By stopping bacterial viability, all of these occurrences lessen the bacteria's capacity to invade the host cell. Previous research has also shown through in-silico results that multi-pharmacological drugs have antibacterial properties that can regulate the proliferation of microbial strains (41). Osthole has potential antibacterial activity based on in silico molecular docking studies. Overall, it was proposed C. seifrizii by virtue of having richness of phytocomponents like osthole could be promising candidates as antibacterial agents.

Molecular Dynamics Studies

Best-docking scored model, osthole- PdeF complex, was chosen for a 50 ns all-atom MDS Molecular dynamics simulation (MDS) was used to verify docking results. MDS makes it easier to accurately analyze the dynamics of biological macromolecules in a controlled physiological setting. Using MDS, a computational method for analyzing the physical interactions in a biophysical system, the flexibility and structural alterations of docked complexes may be seen over the simulation time. According to Liu et al. (30), such an investigation would also evaluate the ligand's crucial binding interactions with important catalytic site residues and provide valuable insights into the dynamic behavior of the ligand and protein. Figure 5 display the findings of the post-MD simulation studies, which is expressed as RMSD, RMSF and Rg as function of the structural stability. 

In comparison to the reference beginning structure, RMSD calculates the average distance between atoms in a structure at a given point in the simulation. The total time-dependent structural divergence or similarity between the structures captured in the trajectory is therefore examined. Examining how RMSD values vary over time or under various circumstances might help one understand the complex's dynamics and stability (31). This graph displays the degree of ligand-protein binding site compatibility during the simulation. A falling pattern might indicate that the ligand is adopting a more advantageous binding position, whereas a rising pattern would indicate that it is exploring other orientations. A stable fit means that the ligand's binding form remains constant. Important information on the orientation and structure of the simulated ligands in relation to their binding pocket might be obtained by tracking RMSD trajectories. After a few nanoseconds, the target, achieved stable confirmation, as the plot of the osthole- PdeF complex demonstrates. The first binding to the substrate causes massive fluctuations between 0.5 nm and 1.0 nm in the RMSD trajectory upon ligand binding till 15 ns, followed by the equilibrium state at <1.0 nm during simulation time. The ligand-protein's RMSD trajectory suggests that it could be trying to find a better binding posture during the simulation, based on the initial binding position. The trajectory seems to have established a better suitable binding position toward the conclusion of the experiment, stabilizing at around 0.9 nm until 50 ns. This finding proved that ligand binding stabilizes the protein structure. These results also validated docking studies, indicating the impactful role of C. seifrizii as antibacterial agent having therapeutic applications.

The macromolecular system's conformational stability may also be described using root-mean-square fluctuation (RMSF). It is an essential metric for assessing the stability and flexibility of complex systems during simulation. The protein's Cα atoms' RMSF values were computed and shown in relation to the residues (Figure 5). The complex's N-terminal (1–100 aa), middle part (100–300 aa), and C-terminal (300 aa–onwards) sections have been identified for investigation. With the exception of small peaks in the protein's C-terminal region, the amino acid residues in the osthole–PdeF complex under study showed very little fluctuation throughout the simulation and remained below 0.4 nm. These results showed that ligand binding had no appreciable effect on the protein's flexibility, with an overall RMSF tone ranging from 0.1 to 0.4 nm. Due to its loop shape, the protein's C-terminal displayed comparatively large RMSF variations. Furthermore, because both are proportionately connected, RMSF values fully supported findings from earlier RMSD trajectory analysis, indicating the preferentially greater stability of the osthole–PdeF complex. The radii of gyration (Rg) of the osthole–PdeF complex was also investigated. To investigate changes in structural compactness, the Rg values of protein backbone atoms were plotted versus time (Figure 5). After the first simulation phase, the ligand-RelB complex binding of osthole–PdeF dropped to 3.85 nm. It indicated a more compressed secondary structure following ligand binding to PdeF protein. The prior RMSD and RMSF findings were in good agreement with all of the Rg values. Further, the binding free energy between best docked ligand and PdeF protein was calculated using the MM-PBSA method, a technique for computing binding energy based on molecular mechanics, Poisson-Boltzmann, and surface area approaches. The osthole-PdeF complex's resultant ΔGbind was determined to be -65.2± 20.14 kJ mol^–1. 

Wet Lab Validation

Antibacterial Activity of Chamaedorea seifrizii Methanol Extract

In order to confirm the in-silico results, the wet lab experiment research was created to evaluate the antibacterial properties of CFME against four bacterial strains. The results are shown in Table 2 and Figure 6 that demonstrated the significant antibacterial impact of CFME. Upon CFME treatment, ZOI ranged from 0.2 cm to 1.7 cm, with most predominant effect on Pseudomonas aeruginosa (MTCC 424) with ZOI 1.7 cm. Staphylococcus aureus (MTCC 3160) and Bacillus subtilis (MTCC 121) exhibited moderate inhibitory activity with ZOI value 0.2 cm. Very interestingly, when compared with positive drug gentamycin, against bacterial strain MTCC 3160, notable ZOI were observed where as positive control was unable to inhibit the growth of the pathogen. Although antimicrobial activity of CFME may be due to presence of major phytocompound such as osthole. However, the antimicrobial role of other phytochemicals existing in minor amounts can’t be ruled out (32). C. seifrizii strong antibacterial qualities may be due to the presence of synergic action of both major and minor bioactive components that inhibited hydrolytic enzymes (proteases) or suppressed partners cell wall envelop proteins, microbial adhesions, and non-specific interactions with carbohydrates (32). Further, antimicrobial potential of CFME against G-bacteria made an important discovery, as Gram-bacteria are mostly resistant to antibiotics. According to earlier research, G-bacteria have stronger cell walls than Gram+ bacteria, which enable them to show resistance to antibiotics.

Membrane Integrity Assay (Cytoplasmic Content Release) of Chamaedorea seifrizii Methanol Extracts

As postulated earlier, molecular docking predicted binding affinity of phytocompounds with cell wall based PdeF receptor and identifies key interactions (like hydrogen bonding) between a ligand and a target or receptor. To support the postulated mechanism of PdeF inhibition and the antibacterial action of CFME, a cell wall integrity test is often undertaken to illustrate how the drug affects bacterial structural defenses. It verifies if the antibacterial drug works by increasing membrane permeability or causing damage to the bacterial cell wall, rather than just metabolic inhibition. It aids in determining whether the extract's constituents target structural integrity or outer membrane proteins. Thereby to support the proposed mechanism of PdeF inhibition and antibacterial activity of CFME, cell wall integrity assay was conducted. The membrane permeability experiment was used to confirm the pathogen's cytoplasmic leakage upon engagement with the CFME formulations. Spectroscopy using UV light was used to measure the fluid system's absorption of visible and ultraviolet wavelengths. This helped to establish a connection between the amount of cytoplasmic leakage and light absorption. Pseudomonas aeruginosa (MTCC 424), Staphylococcus aureus (MTCC 3160), Bacillus subtilis (MTCC 121), and Escherichia coli (MTCC 40) were exposed to CFME for 0–12 h in order to examine the membrane integrity of these substances (Figure 7). Antibacterial action was demonstrated by CFME in a test pathogen-dependent manner. Additionally, all bacterial cells treated with CFAE showed a linear rise in CCR as evidenced by increase in absorbance values. The results showed proving that the permeability of the bacterial cell wall was increased after 12 h of treatment with CFME. The leakage of nucleic acids or proteins from the cell is often a critical sign of cell membrane integrity. CFME showed almost greater CCR to reference control Triton-X-100 with MTCC 40, 121, and 3160 pathogens as compared to positive control data. By serving as an in vitro validation technique to demonstrate that the anticipated, in silico binding (docking) of a chemical to a target protein truly causes a physical, functional, or structural change in the membrane, membrane integrity assays validated the docking of bioactive substances. This prediction was functionally validated by the membrane integrity experiment. A ligand binding to a membrane-related enzyme may have been demonstrated by docking. The functional consequence of the binding, which is that the substance affects the structural integrity of the membrane, was validated by an experiment that measured the leakage of cytoplasmic components. Numerous new drugs and natural extracts have antibacterial activity through morphological alterations and membrane disruption. The bacterial membrane's integrity is essential for life and can either directly or indirectly causes cell death. The bacterial cell membrane performs important functions such as lipid production, transport, osmoregulation, and peptidoglycan cross-linking. Studies in the literature on the disruption of membrane cells by natural extracts from various medicinal plants have shown that natural extracts and their constituents act against a variety of targets, especially the cytoplasm and cell membrane, and sometimes completely change the Ammendolia morphology of the cells (33). In essence, while docking predicted that a compound binds to a site that might lead to disruption, the membrane integrity assay proved that the predicted interaction leads to actual membrane disruption. The assay provides physical evidence that CFME causes structural failure in the bacteria, validating that PdeF inhibition leads to, or coincides with, cell wall collapse.

In-silico Pharmacokinetics

Table 3, describes physiochemical properties and drug likeness of osthole. The Molecular Weight of osthole was 244.29 g/mol and topological Surface Area (TPSA) was 105.693 Ų. LogP value was 3.34. Drug likeness was evaluated by based on rules such as using Lipinski, Veber, and Egan's. It was observed that bioactive compound osthole did not violate Lipinski rule of five (RO5). Drugs used orally are not allowed to break more than one of the five Lipinski guidelines. Bioavailability score of osthole was 0.55. The pace and degree to which a medication (or other chemical) enters the bloodstream and circulates throughout the body is referred to as its bioavailability. It's a key component in figuring out how well a medication will function after being taken. A "good" bioavailability score, especially for oral drugs, generally indicates a high probability of a compound being absorbed into the bloodstream after being administered; a score of 0.55 or higher is often considered optimal, meaning a large portion of the drug will be absorbed and enter the systemic circulation (34). However, the ideal score can vary depending on the specific drug and its intended use. Thus, it can be said that the identified compound is soluble and permeable, making them suitable for usage as oral anticancer medications. These observations could be a good indicator of medication safety (35). This proved that molecule possessed properties similar to those of drugs.

Further ADMET properties of osthole were also predicted using pkCSM online server (Table 4). Pharmacokinetic properties include absorption (human intestinal absorption (HIA) and human colon adenocarcinoma cells (Caco-2), distribution (plasma protein binding (PPB) and blood-brain barrier (BBB), metabolism (CYP2D6 and CYP3A4 as substrate and inhibition), and toxicity test (mutagenic and carcinogenic) were predicted in compounds of papaya leaves before further stages (clinical trials). Caco-2 showed value of -4.612, indicating good permeability. Caco-2 is widely used as a model in in vitro testing when predicting human drug absorption through the intestinal epithelial cell barrier. Osthole showed high GI absorption with TPSA 39.44 Å. Srimai et al. (36) found that ligands with smaller molecular weights had a higher probability of diffusing rapidly and overcoming biological membranes. According to Wu et al. (35), TPSA is a very accurate indicator of drug absorption. A log BB value of 0.426 indicates a compound with high blood-brain barrier (BBB) permeability. BBB is used to characterize the distribution of compounds to the blood-brain barrier membrane permeability (37). A log Ps (logarithm of the permeability-surface area product) value of -2.01 indicates moderate to high, likely sufficient, CNS permeability. Further, osthole was non-substrate to P-glycoprotein (P-gp) efflux exporter. By pumping drugs back into the lumen, P-gp decreases the absorption of drugs in the stomach. Osthole had an inhibitory effect on the CYP1A2, CYP2C19 and CYP2C9 enzymes and non-inhibitory capabilities against the other enzyme series such as CYP2D6 and CYP3A4. According to Srimai et al. (36), the liver is home to the CYP450 class of enzymes that aid in the organism's detoxification process. CYP2D6 and CYP3A4 are two of the subtypes of cytochrome P450 (CYP450), an essential enzyme system for drug metabolism in the liver. Since they metabolize around 50% and 30% of the medications on the market, respectively, CYP3A4 and CYP2D6 are the most important CYP enzymes (37). Osthole was non-substrate to Renal OCT2 (Organic Cation Transporter 2). These are transporters, playing key roles in drug elimination. Radar and network charts to depict ADMET is also illustrated in Figure 8.

Ligands' toxicity profile was also determined (Table 4). According to Van Norman (38), a toxicity study is required for drugs that might endanger humans, animals, or the environment. Predication was based on different level of toxicity such as organ toxicity (neurotoxicity, cardiotoxicity, hepatotoxicity, respiratory toxicity, and nephrotoxicity), toxicological endpoints (like cytotoxicity, immunotoxicity, mutagenicity, carcinogenicity, clinical toxicity, ecotoxicity, and nutritional toxicity), toxicological pathways (AOPs), toxicity targets, targets for molecular initiating events (MIEs), and six molecular targets for metabolism are among the diverse levels of toxicity that the prediction scheme is divided into, thereby providing insights into the possible molecular mechanism behind such toxic response. Further, in-depth toxicological evaluation revealed that both of the bioactive substances used as ligand is insensitive to biological processes that depend on targets, including the stress response or nuclear receptor signaling pathways. These have been described as significant biological targets in the human body. It was observed that osthole is safe bioactive components since they fall within toxicity class 5, gives strong indications that this compound may nonetheless be non-toxic. The lethal toxicity dosage of a medicine is determined by the hazardous unit called LD₅₀. Osthole expected lethal dose (LD₅₀) was 2905mg/kg making it favorably less toxic. The higher the lethal dose per kilogram of a compound, the lesser its toxicity. The log10 (LD50) values of 3.6 for osthole on the hazardous scale demonstrated the bioactive chemical's non-toxic nature. The −log10 (LD50) value of ligands on the hazardous scale falls between 2.8 and 3.7, indicating that the bioactive compounds are not poisonous. The findings of the Ames test, a common biological test that uses mutant bacteria (Salmonella typhimurium/E. coli) to rapidly screen compounds for their ability to induce DNA mutations (mutagenicity) and, therefore, cancer (carcinogenicity), are referred to as Ames toxicity. Notably, Ames test for osthole was negative, suggesting that osthole was neither mutagen or carcinogenic. Tiwari et al. (39) state that if all medications are mutagenic, meaning they damage live cells and are the main cause of diseases like cancer. According to the toxicity profiles, which include hepatotoxicity, and skin Sensitisation, osthole was not harmful to any organs (Table 4).

The goal of Tox21 (Toxicology in the 21st Century) is to determine how environmental toxins disrupt human biological processes and employ high-throughput screening to link these disruptions to unfavorable health effects. In an effort to replace animal testing with molecular and computational data, it assesses substances against important pathways, such as nuclear receptors, stress response pathways, and developmental pathways. Interestingly, osthole was inactive against all pathways and receptors involved in different pathways (Table 5). Over all, it was observed that compounds were inactive for majority of pathways thus exerting non toxic effects.

Conclusion

This study reports phytochemistry and antibacterial potential of Chamaedorea seifrizii fruit based methanol extracts. Chemical profiling revealed the presence of major bioactive compound such as osthole in Chamaedorea seifrizii fruit based methanol extracts. In silico study revealed robust docking of major phytocompound osthole with PdeF proteins which was validated by MDS. In vitro antibacterial activity assays of Chamaedorea seifrizii extracts demonstrated potential growth inhibition against tested pathogens. Therefore, we suggest that Chamaedorea seifrizii extracts has potential to mitigate infections caused by gram positive and gram negative bacteria. To make space for these compounds in drug development, more research utilizing in vitro and in vivo models should be carried out to validate these compounds Chamaedorea seifrizii fruit based methanol extracts.