Introduction

Mycobacterium tuberculosis (Mtb) is the causative agent of tuberculosis (TB), an infectious disease that continues to be a threat to global public health, especially in low-to-middle-income countries (1). TB is a preventable and usually curable disease. Yet in 2022, TB was the world's second leading cause of death from a single infectious agent, after coronavirus disease (COVID-19), and caused almost twice as many deaths as HIV/AIDS. TB was responsible for approximately 1.3 million deaths in 2022 (2, 3). With the emergence of multidrug-resistant tuberculosis (MDR-TB), extensively drug-resistant tuberculosis (XDR-TB), and the resistance of multiple first-line and second-line TB medications, including isoniazid and ethionamide, novel therapeutic agents are urgently needed, and continued drug discovery efforts required (4, 5).

Identifying novel receptor proteins as targets of a broad number of compounds with varying chemical scaffolds has provided essential tools to understand the mode of action of potential antimycobacterial compounds at the Mtb protein receptor level (6, 7). MmpLs (Mycobacterial membrane proteins Large), which play crucial roles in transporting lipids, polymers, and immunomodulators and extrude therapeutic drugs, have been among the most important therapeutic drug targets to emerge recently (8). MmpL3, one of these proteins, is an essential mycolic acid and lipid transporter required for growth cell viability and is crucial for cell-wall biosynthesis (9, 10, 11). More than thirty pharmacophores have been reported to target MmpL3 (12, 13). Since MmpL3 is involved in key pathways for M. tuberculosis survival, it could be exploited to develop novel anti-TB drugs (9, 10). These developments prompted us to re-evaluate the antimycobacterial terpenoids we isolated earlier and co-workers (14-17) using in silico techniques, including molecular docking.

In this study, seven triterpenoids (see Figure 1) were docked into the ligand-binding pocket of the multi-pharmacophore MmpL3 receptor protein (PDP ID: 6ajh) to investigate their interactions with the amino acids in the selected pocket. The binding pocket was identified based on the protein-inhibitor interactions observed in the MmpL3 complex with the inhibitor AU1235 (1-(2-adamantyl)-3-[2,3,4-tris(fluoranyl)phenyl] urea). Additionally, the binding affinities of the triterpenoids were compared with those of the TB drug candidate AU1235. The insights gained from the ligand-receptor interactions within the binding site will enhance our understanding of the structural features in the terpenoid skeleton necessary for their observed antimycobacterial activity. To assess the in vivo potential of these compounds as anti-TB candidates, an ADMET (absorption, distribution, metabolism, excretion, toxicity) profile evaluation was conducted (18, 19). The results were expected to support earlier in vitro studies and demonstrate the value of in silico approaches in understanding the modes of action of the selected triterpenoids, offering opportunities to develop novel antimycobacterial agents.

["Figure", "https://etflin.com/file/figure/20240425145039757616792.png", "Figure 1. 2D Structures of selected terpenoids and the MmpL3 inhibitor AU1235.", "", "80%", "1"]

Experimental Section

Molecular docking was carried out using Autodock Vina embedded in PyRx 0.8. The receptor protein MmpL3 (PDB ID: 6ajh; 2.82 A) was employed as the receptor protein (20). The selected triterpenoids were used as ligands.

Ligand Retrieval and Preparation

The selection of the ligand molecules was based on earlier studies on the antimycobacterial activity of two East African medicinal plants, Ajuga remota, and Melia volkensii, coupled with a literature survey. Seven triterpenoids, compounds 1-7 ( see Figure 1), whose antimycobacterial potential was investigated in vitro earlier, were selected for the current in silico study (14, 15, 17). The first-line anti-TB drug isoniazid was used as a comparative standard (21). The MmpL3 inhibitor or AU1235, 1-(2-adamantyl)-3-[2,3,4-tris(fluoranyl) phenyl]urea, was used to validate the docking exercise (22). 3D structures of compounds to be studied were downloaded in SDF format from the PubChem database (https://pubchem.ncbi.nlm.nih.gov/) (1-6) is a public repository for information on chemical substances and their biological activities. The compounds were then energy minimized by Open Babel 2.3.1 using the MMFF94 force field with an energy gradient of 0.05 using the steepest descent algorithm, 500 numbers steps, and 10e-7 convergence parameter to generate an energetically reasonable posture for docking. The various optimized 3D structures were finalized for docking using Autodock tools 1.5.7 and saved as PDBQT files for the subsequent steps.

Receptor Protein and Molecular Docking Preparation

The MmpL3 receptor protein (PDB ID: 6ajh) was selected based on information from the literature (9). The 3D structure of the receptor protein in complex with AU1235 (1-(2-adamantyl)-3-[2,3,4-tris(fluoranyl)phenyl]urea) was obtained from the Protein Data Bank repository (https://www.rcsb.org; accessed on March 3rd, 2024) (20). The receptor protein was prepared for docking using UCSF ChimeraX (Resource for Biocomputing, Visualization, and Informatics at the University of California, San Francisco) and AutoDock Tools 1.5.7 (Scripps Research, La Jolla, California, USA). The preparation involved removing unwanted water molecules, bound heteroatoms, and other ligands. Polar hydrogens and Kollman charges were added, and the protein molecule was saved in .pdbqt format.

Docking studies for the target protein (PDB ID: 6ajh) and various triterpenoid ligands were performed using AutoDock Vina, embedded within PyRx 0.8, and the results were visualized with PyMOL, Protein Plus, and Discovery Studio Visualizer version 2020. The grid box was centered on the binding pocket with Vina search space parameters: Center (Å) x: 35.8727, y: 3.9155, z: 20.7025; Dimensions (Å) x: 23.4367, y: 22.1532, z: 22.1676. An exhaustiveness level of 8 was used. The binding interactions between the protein and ligands were analyzed and visualized using Discovery Studio Visualizer version 4.0. The docking results were then clustered based on root mean square deviation (RMSD) to assess the structural variability of the binding conformations. The clusters were ranked according to the predicted free energy of binding, which provides an estimation of the strength and stability of each protein-ligand interaction. Binding postures were further analyzed using Ligplot Plus version 2.2.8 and Protein Plus to evaluate the specific contacts and interactions, such as hydrogen bonds and hydrophobic interactions. Finally, the dissociation constants (Kd) were calculated using the online tool NovoPro at www.novoprolabs.com/tools/deltag2kd.

Docking Validation

To validate the docking process, the native ligand co-crystallised with the protein was extracted and redocked in the corresponding binding pocket of the receptor protein. The ligand's ability to reproduce the ligand's orientation and position in the bound form was determined using the Root Mean Square Deviation (RMSD) of the superimposed co-crystal and posting pose of the native ligand.

Results and Discussion

Isolation of Compounds

During a bioassay-guided study reported earlier, Ajuga remota led to the isolation of ergosterol-5,8-endoperoxide compound 1 with a MIC of 1mg/mL. Acetylation of compound 1 gave the acetate compound 2, with an MIC of 8mg/mL (14, 16). Studies on Melia volkensii resulted in isolating 12β-hydroxykulactone compound 3 and 6β-hydroxykulactone compound 4. Compound 3 had an MIC of 16mg/mL, while compound 4 had an MIC of 4mg/mL (15, 16). Studies on Borrichia frutescens by co-workers afforded (24R)-24,25-epoxycycloartan-3-one compound 5 and (3β,24R)-24,25-epoxycycloartan-3ol compound 6 with MICs of 8mg/mL, whereas compound 7 the acetate of compound 6 was inactive with an MIC >128mg/mL (16, 17). Correlations of structural features and the MICs of the seven triterpenoid compounds 1–7 suggest that the presence of the C-3 keto or β-hydroxy group, the cyclopropane ring, and the epoxide moieties, as well as the presence of a β-hydroxyl group on C-6 or C-12, seem to play an important role in the observed in vitro anti-tuberculosis activity of these compounds. However, the apparent importance of these functional groups is lacking structural evidence at the relevant protein receptor level. Further studies utilizing crystallography or cryo-EM are needed to elucidate the precise binding interactions of these triterpenoids with their target proteins.

["Table", "Table 1. Interactions of the mycolic acid transporter MmpL3 receptor with selected triterpenoids and the anti-TB drug candidate AU1235.", "9pt", "1"]

Ligand	In vitro MIC µg/ml	Binding affinity kcal/mol	Number of various interactions
Ligand	In vitro MIC µg/ml	Binding affinity kcal/mol	Alkyl	Pi-donor bond	Conv. H bonds	Pi- Sigma bond	Steric clash
Ergosterol endoperoxide	1	-10.8	4	1	0	0	0
3β-Acetoxy ergosteryl endoperoxide	8	-6.4	6	0	0	0	1
6β-Hydroxy kulactone	4	-7.3	5	1	0	1	1
12β-Hydroxy kulactone	16	-5.9	4	1	1	1	1
(24R)-24,25-epoxycycloartan-3-one	8	-6.4	0	2	0	0	1
(3β,24R)-24,25-epoxycycloartan-3-ol	8	-7.8	6	0	0	1	1
(3b,24R)-24,25-epoxycycloartan-3-acetate	>128	-4.3	4	0	0	0	2
(1-(2-adamantyl)-3-[2,3,4-tris(fluoranyl)phenyl] urea)	-	-12.0	6	0	1	1	0

["Figure", "https://etflin.com/file/figure/202409041337341470014444.jpg", "Figure 2. The MmpL3 receptor protein bound to compounds 1-7 at the binding pocket of the native ligand AU1235 depicted in A and the superimposed co-crystal and post-docking pose of the native ligand AU1235 depicted in B.", "", "100%", "1"]

Molecular Docking

In the present study, seven triterpenoids with varying antimycobacterial tuberculosis activity were subjected to an in silico molecular docking on the multi-pharmacophore receptor protein MmpL3, an essential mycolic acid and lipid transporter ligand binding domain (LBD). The LBD is usually involved in receptor dimerization, ligand recognition, and cofactor protein interactions. A docking study was performed to evaluate the binding potential of the seven selected triterpenoids. The docking affinities calculated by Autodock Vina ranged between -4.5 to 10.5 kcal/mol and indicated strong binding to the target protein (see Table 1). This was compared with the anti-TB drug candidate AU1235 and the anti-TB drug isoniazid. From the docking study, ergosterol endoperoxide had a binding affinity of -10.8 kcal/mol, while ergosterol-3β-acetate endoperoxide had a lower binding affinity score of -6.4 kcal/mol. Also, (3β,24R)-24,25-epoxycycloartan-3-ol had a binding a binding score of -7.8 kcal/mol while (3β,24R)-24,25-epoxycycloartan-3-acetate had much a lower binding score of -4.3 kcal/mol. This observation is in tandem with the trend observed in the experimental in vitro results obtained earlier.

Figures 3 and 4 present docking interactions between the selected ligands and the receptor protein. Compounds 1 and 2 exhibited van der Waals interactions with Ser293, Gly641, Ile319, Leu686, Asp256, Tyr257, Phe260, Leu678, and Ile679. Both compounds also showed pi-alkyl and alkyl interactions with Ile253 and Ile297. However, compound 1 formed a pi-donor hydrogen bond between its 3β-hydroxy group and the amino acids Phe649 and Phe260, absent in the 3β-acetyl derivative (compound 2) (see Figure 2). The closely related derivatives (3β,24R)-24,25-epoxycycloartan-3-one (compound 5), (3β,24R)-24,25-epoxycycloartan-3-ol (compound 6), and (3β,24R)-24,25-epoxycycloartan-3-acetate (compound 7) also showed van der Waals interactions with similar amino acids, including Ser293, Ile679, Thr289, Tyr257, Tyr301, Asp256, and Ala682.

["Figure", "https://etflin.com/file/figure/20240425145039346850084.png", "Figure 3. 2D diagrams showing interactions of the protein (PDB ID: 6ajh) amino acids in the receptor pocket docked with the most favourable pose of the triterpenoids (1-4).", "", "90%", "1"]

Compounds 6 and 7 shared alkyl interactions with Ile297, Ile249, and Val638, whereas compound 5 did not. Compounds 5 and 6 formed a pi-sigma bond with Phe649, while compound 7 did not. Additionally, compound 5 formed a pi-donor hydrogen bond between its 3-keto group and Phe260 (Figures 3 and 4). These docking results align with the observed in vitro antimycobacterial activity of compounds 5, 6, and 7, highlighting the significance of a hydroxyl or keto group at position C-3 of the epoxycycloartan skeleton.

Compounds 3 (12β-hydroxykulactone) and 4 (6β-hydroxykulactone) displayed the same van der Waals interactions with the amino acids Ser301, Ser300, Gly641, Ala637, Leu708, Leu686, Ala682, Asp256, Phe260, Tyr257, Val290, Thr289, Phe649, Ser293, and Asp645. The C-10 methyl group in compounds 3 and 4 formed a pi-sigma bond with Tyr646. However, compound 3 formed a conventional hydrogen bond with Asp256, while compound 4 formed one with Leu642. The docking results for compounds 3 and 4 support the observed in vitro antimycobacterial activity, emphasizing the importance of a β-hydroxyl group at positions C-6 and C-12.

["Figure", "https://etflin.com/file/figure/20240425145039160865277.png", "Figure 4. 2D diagrams showing interactions of the protein (PDB ID: 6ajh) amino acids in the receptor pocket docked with the most favourable pose of the selected triterpenoids (5-7) and the MmpL3 inhibitor AU1235 (8).", "", "90%", "1"]

The C-4 methyl group in compounds 5 and 6 formed a pi-sigma bond with Phe649. In contrast, the 3-acetate derivative of compound 6 did not interact with the C-4 methyl groups. The best-docked triterpenoid conformers were selected based on their binding energy and favorable interactions with the amino acid residues in the active site.

The MmpL3 receptor protein bound to compounds 1-7 at the native ligand AU1235 binding pocket is shown in Figure 2A. The binding energies and the various ligand-receptor amino acid interactions are listed in Table 1. The molecular docking procedure was validated by the ability of the native ligand to reproduce the pose and the position in the bound form, as shown in the superimposed co-crystal and post-docking pose of the native ligand depicted in Figure 2B. The Root Mean Square Deviation (RMSD) of the superimposed co-crystal and post-docking pose of the native ligand AU1235 was determined to be 1.2Å, an RMSD value < 2Å validating the docking procedure.

ADMET Prediction

ADMET is an abbreviation for Absorption, Distribution, Metabolism, Excretion, and Toxicity and plays key roles in drug discovery and development. A high-quality drug candidate should have sufficient efficacy against the therapeutic target and show appropriate ADMET properties.

["Table", "Table 2. ADMET properties for the selected seven triterpenoids and the TB drug candidate AU1235.", "9pt", "1"]

Ligand	Mwt	No. RBs	logP	Ro5	LD50 mg/kg	Carcinogen	Ames test	HIA	HBA	HBD
Ergosterol-5,8-endoperoxide	428.6	4	5.59	1	2340	inactive	Non-mutagen	0.96	3	1
Ergosteryl -3β-acetate-5,8-endoperoxide	470.6	6	5.89	1	79	inactive	Non-mutagen	0.97	4	0
6β-Hydroxy kulactone	468.6	3	5.31	1	914	active	Non-mutagen	0.96	4	1
12β-Hydroxy kulactone	468.6	3	5,24	1	2589	active	Non-mutagen	0.96	4	1
(24R)-24,25-epoxycycloartan-3-one	440.7	4	6.27	1	16000	inactive	Non-mutagen	1.00	2	0
(24R)-24,25-epoxycycloartan-3-ol	442.7	4	6.26	1	5000	inactive	Non-mutagen	0.97	2	1
(24R)-24,25-epoxycycloartan-3-acetate	484.7	6	6.56	1	5000	inactive	Non-mutagen	0.98	3	0
AU1235	324.3	4	3.42	0	4000	inactive	Mutagen	0.92	3	2

The underlying goal is to understand better a compound's toxicity and safety profile to decide whether the compound can be subjected to further studies. The five properties in ADMET can be determined experimentally and, to some degree, computationally (23). ADMET prediction was performed on the seven triterpenoids and AU1235. This was accomplished using Discovery Studio 4.5 (Accelrys Inc., San Diego, CA, USA) and an online server PreADMET ver 2.0 (https://preadmet.bmdrc.kr) (24). The predicted parameters included human intestinal absorption (HIA), LogP, LD50, carcinogenicity, and Ames mutagenicity. From the ADMET data, the triterpenoids did not violate more than one Lepinski's rule of 5 (Ro5) and can, therefore, be categorized as drug-like compounds (25, 26). Also, they are safe with acceptable LD50 values, bioavailable, and non-mutagenic (Table 2).

Cell permeable compounds should have HBD (hydrogen bond donors) ≤ 5, HBA (hydrogen bond acceptors) ≤ 10), Mwt ≤ 500, and log P ≤ 5. No. RBs (number of rotatable bonds) should be ≤ 5. HIA (human intestinal absorption) bioavailability endpoint should be ≥ 0.5. Ro5 (Lepinski's rule of 5) should be ≤ 1.

Conclusions

The in silico study revealed that the β-hydroxy group on C-3 or C-6 are vital structural features in the triterpenoid skeleton for antimycobacterial activity. Toxicity predictions revealed that this class of compounds had no mutagenic effects and displayed favorable pharmacokinetic parameters. From these studies, it can be concluded that in silico techniques can be utilized to fast-track the development of new drugs to treat tuberculosis.

Overall, the study reveals the potential of the triterpenoid skeleton exemplified by the readily available ergosterol-5,8-endoperoxide compound 1 as a helpful scaffold in searching for and developing effective therapeutic lead entities to facilitate anti-tuberculosis drug discovery.

Search Results